A Premium quality mould release polish. This polish gives excellent surface finish to product with high gloss. It is easy to apply and gives excellent release properties. Gelcoat defects/ surface defects are minimized when Max Polish No 7 PHANTOM is used.  Moulding can be done With or Without PVA. Labour and efforts for finishing of moulded parts is very less.

Fine carvings or design on the moulds are perfectly transferred on the moulded products. Very economical for repeated large quantity production of FRP parts due to very low consumption.

ADVANTAGES OF MAX POLISH No 7® PHANTOM

• Very Easy to apply on mould.
• Gives Very Good Shine to the mould.
•  Polish gives a very durable film.
•  Seals the porosity of the moulds, thus making it impermiable, increasing the life of the moulds.
•  Multiple release in single application.*
• Moulding can be done With or Without PVA
• Can withstand temperature fluctuations.
• Very good finish to the moulded parts.
• Labour and efforts for finishing of moulded parts is very less.
•  Less styrene migration, thus less build up.
•  Gelcoat defects/ surface defects are minimized when Max Polish No 7 ®PHANTOM is used.
•  Fine carvings or design on the moulds are perfectly transferred on the moulded products.
•  Very economical for repeated large quantity production of FRP parts due to very low consumption.
• Where porous moulds are used, such as wood or plaster, the surface generaly needs to be sealed prior to application of the release agent. This can be accomplished by the application of one or two extra coats of a MAX POLISH No 7 PHANTOM. This perfectly seals the mould and thus eliminates the use of mould sealer, thus increases the production.